Installation Process

Place the motherboard on top of the casing in the right place



The motherboard is properly located




Attach Bolt Lock



The motherboard is mounted



Install Processor (Remember the triangle mark position near the hinge lock)



Processor is in the correct position



Press Lock



Processor has been installed correctly



Install Heatsink



Press the lock with a special tool



Heatsink installed correctly




Connect the Processor Fan Cable



The cable is mounted



Open lock RAM



Install RAM in a way suppressed




Lock locks by itself and installed RAM




Do the same with the other RAM




RAM installed correctly




Install the VGA card




Press the VGA card and do not forget to attach penguncinya




VGA card is installed




Attach Bolt Lock




True VGA card installed




Connect the Reset Switch Cable




Reset Switch Cable Already Installed




Replace Power Switch Cable




Already Installed Power Switch Cable




Replace the HDD cable indicator




Already Installed HDD cable Indicator




Install Cables VCC




Connect the USB Cable Panel




Replace the front panel Microphone Cables etc.




All cables have been installed




Install Power Supply Cables




Cable Power Supply is mounted




Replace the hard drive (be careful not to reverse)




Tighten the lock screw (do not forget the other side too)




Put Floppy drive




Replace the bolt lock (do not forget the other side too)




Install CD ROM




Replace the bolt lock (do not forget the other side too)




Install DVD ROM



Replace the bolt lock (do not forget the other side too)



Put Floppy Cables



Put Floppy Cable on Motherboard




Install the Optical Drive Cable




Install Optical Cable Drive In accordance with the optical drive




Put on the Hard Drive IDE Cables




Replace IDE hard drive cable in the Primary Slot




Put in the DVD ROM IDE Cable




Put in the CD ROM IDE Cable




Attach IDE Cable CD & DVD ROM on Secondary slot




Install the Optical Drive Power Cable



Install FDD and Hard Disk Power Cable




Connect the fan cable




Already Cable Installed




Attach Bolt Lock Case




Attach Bolt Lock Case




Installation Completed